Sale!

BMW N13 F20 116i 118i Charge Pipe and Boost Pipe

$330.00 $320.00

F2X F3X 118i 120i N13 N16 Charge Pipe Boost pipe COMBINATION PACKAGES

Make your BMW better

This pressure tube replaces the original BMW part with the following part number: 13717597587

Features:

DSMJT’s charge pipe can replace OEM’s pipe(Aluminum replaces Plastic).

The Pipes are made from heavy duty High Grade 6061 aluminum.

DSMJT’s pipe body has the warranty for 3 years(non- human factor damage)

The lifetime of accessories can be predictable.

Increase throttle responses and decreases turbo lag.

The end diameter of charge pipe is larger than the OEM.

Enlarge the charge pipe end diameter to increase the air flow.

The internal polishing of pipe can increase the air flow.

G Class- With special polishing process inside can reduce the situation of air hindering.

Aluminum pipe can stable air flow also reduce the reaction time of throttle.

Retain the OEM’s o-ring throttle body lock flange.

Precision CNC machined throttle body flange ensures leak free connection to throttle body.

Quick and easy connection and disconnection to throttle body.

Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost.

Increase the part’s durability to extend the lifetime.

Directly install without any modifications.

Include all hardware for complete installation.

Part 13717597587 、 13717597588 was found on the following vehicles:

1 SERIES:
F20 114i ,116i , 118i
F20 LCI 118i , 120i

1’F20(07/2010 – 02/2015)
1’F20 LCI(06/2014 – 06/2016)
1’F21(12/2011 – 02/2015)
1’F21 LCI(06/2014 – 06/2016)

Availability: 100 in stock

BMW N13 F20 F21 F30 F31 116i 118i Charge Pipe and Boost Pipe Set,13717597587 、 13717597588

for N13 N16 engine

BMW N13 F20  116i 118i 13717597587 charge

F2X F3X 118i 120i N13 N16 CHARGE PIPE COMBINATION PACKAGES

DSMJT delivers outstanding driving dynamics, efficiency and safety
DSMJT’s turbine tubes can replace OEM tubes (aluminum replacement plastics).
If your BMW has a high boost,

Make your BMW better

This aluminum tube replaces the factory plastic tube. For vehicles with a boost in performance, the increased boost pressure can cause the original pipe to burst. In the worst case, this defect can lead to engine damage due to sucked fragments.

The aluminum charge pipe has an increased diameter (3 “or 76mm) compared to the original, reducing air turbulence and increasing airflow at the same time, resulting in a faster response of the turbocharger and a higher maximum possible Performance The software of the engine control unit does not have to be re-tuned, even with very high charging pressures there is no danger of bursting, and this charge pipe offers a good basis for upgrading a water-methanol injection, a connection for the injector is already available Installation is relatively easy as this batch pipe plug n play is exchanged for the series part.

BMW-N13-N16- air intake-pipe-Part sg71367

Part 13717597587 、 13717597588 was found on the following vehicles:

1 SERIES:
F20  116i , 118i
F20 LCI 118i , 120i

1’F20(07/2010 – 02/2015)
1’F20 LCI(06/2014 – 06/2016)
1’F21(12/2011 – 02/2015)
1’F21 LCI(06/2014 – 06/2016)