BMW N20 F10 / F20 / F30 125i / 320i / 328i / 420i / 428i / 520i / 528i / X1 / X3, Intake Pipe / Reinluftrohr 13717605638

BMW N20 F10 / F20 / F30 125i / 320i / 328i / 420i / 428i / 520i / 528i / X1 / X3, Intake Pipe /  13717605638

BMW N20 Intake PIPE

DSMJT delivers outstanding driving dynamics, efficiency and safety
DSMJT’s turbine tubes can replace OEM tubes (aluminum replacement plastics).
If your BMW has a high boost,

Make your BMW better

This Intake Pipe replaces the factory plastic pipe. For vehicles with an increase in performance, the increased boost pressure can cause the original pipe to burst. This defect can lead in the worst case by sucked fragments to engine damage.

This aluminum tubing reduces air turbulence while increasing airflow. This results in a faster response of the turbocharger and a higher maximum possible power. The engine control unit software does not need to be retuned. Even with very high charging pressures there is no risk of bursting. The installation is relatively simple because the clean air pipe plug n play is exchanged for the series part.

This upgrade  replaces the BMW original part with the part number: 13717605638

Features:

DSMJT’s turbo pipe can replace OEM’s pipe(Aluminum replace Plastic).

Pipes made from heavy duty High Grade 6061 aluminum.

DSMJT’s pipe body has the warranty for 8 years(non- human factor damage)

The lifetime of accessories can be predictable.

Increase throttle response and decreases turbo lag.

The end diameter of turbo pipe is larger the OE factory.

Enlarge the turbo pipe end diameter to increase the gas flow.

The internal polishing of pipe can increase the gas flow.

G Class- With special polishing process inside can reduce the situation of gas hindering.

Aluminum pipe can stable gas flow also reduce the reaction time of throttle.

Retains factory style o-ring throttle body lock flange.

Precision CNC machined throttle body flange ensures leak free connection to throttle body.

Quick and easy connection and disconnection to throttle body.

Diverter Valve Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost.
Increase the part’s durability to extend the lifetime.

Reserved water injection hole.

The connector is made from strengthening plastic with three layers yarn.

Directly install without any modifications.

Includes all hardware for complete installation.

parts 13717605638was found on the following vehicles:

1 SERIES:
F20 F21 120i 125i M125i

2 SERIES:
F22 F23 220i

3 SERIES:
F31 F35 320i ,328i 320GT 328GT

4 SERIES:
F32 F33 F35 420i ,428i , 420GC , 428GC

5 SERIES:
F07 GT LCI 528i
F10 F10 LCI 520i 528i 528IX
F11 F11 LCI 520i 528i 528IX
F18 F18 LCI 520i 528i 528IX

X1 SERIES:
E84 16i 20i 20ix 28i 28iX
X3 SERIES:
F25 18i 20i 20ix 28i 28ix

X4 SERIES:
F26 20ix 28ix

X5 SERIES:
F15 28ix 20ex

X6 SERIES:
F16 28ix

Z4 SERIES:
E89 18i 20i 28i
BMW OEM part number

OEM parts number :13717605638
Charge air induction tract

對應年份
1’F20 (07/2010 — 02/2015)
1’F20 LCI (05/2014 — 06/2016)
1’F21 (07/2010 — 02/2015)
1’F21 LCI (09/2014 — 06/2016)
2’F22 (10/2012 — 06/2016)
2’F23 (04/2014 — 06/2016)
3’F31 (07/2011 — 06/2015)
3’F35 (06/2011 — 08/2015)
4’F32 (11/2012 — 01/2017)
4’F33 (03/2013 – 02/2016)
4’F36GranCoupe(07/2013 – 12/2016)
5′ F07 GT LCI   (08/2012 — 02/2017)
5’F10   (06/2010 — 06/2013)
5′ F10 LCI   (10/2012 — 10/2016)
5′ F11   (06/2010 — 06/2013)
5′ F11 LCI   (10/2012 — 02/2017)
5′ F18   (03/2011 — 08/2013)
5′ F18 LCI   (10/2012 — 04/2017)
X1 E84   (04/2009 — 12/2015)
X3 F25   (02/2011 — 08/2017)
X4 F26   (05/2013 — 02/2018)
X5 F15   (08/2013 — 03/2018)
X6 F16   (11/2014 — 02/2018)
Z4 E89   (01/2011 — 08/2016)